Glass door and window maintenance requires film "care"
[China Glass Network] When it comes to maintaining glass doors and windows, do you first think of cleaning glass to keep it clean? If it is, then you are out, and the protection of the glass door and window has been quietly popular. Just sticking the film to the door and window, you can't be too casual. If the film is not used properly, it is very likely that it will be self-defeating. Xinke Protective Cotton Flame Resistant Fabric has good breath ability and wicking properties, soft and comfortable. This is a characteristic of all-cotton materials, which allows us to develop a more comfortable feel while developing flame retardant functions. Of course, other materials fabrics have their own characteristics, such as cotton polyester fr fabric, cotton nylon fr fabric, arimid fabric, modacrylic fabric etc. If you are interested, you can find their related introductions in other categories. Cotton Flame Resistant Fabric Cotton Flame Resistant Fabric,Flame Resistant Fabric,Fire Resistant Fabric,Stain Flame Resistant Fabric Xinxiang Xinke Protective Technology Co, Ltd. , https://www.coverallsuit.de
Before the film is applied, measure the size of the door and window, then take out the special film to check the size and quantity of the film, and cut the film. The glass must be cleaned, so that the glass is free of dander, dust, and sand. After cleaning the glass, spray water again. The film is divided into two layers, one layer is colorless and transparent, called a protective film, and the other layer is called a film with adhesive color. First spray the lubricating liquid before the film to reduce the viscosity of the adhesive layer, then peel the protective film on the side of the film, adjust the position of the film on the glass window, the action is to first cross, then wipe the film from the middle to the sides, fix the film, put The bubbles are driven out from both sides, and the force is light, so as to avoid the film being scratched by excessive force. The lubricating film should also be sprayed on the film to separate the protective film from the film. The direction of action is the same as that of the previous step. The water is scraped off vigorously, and the water is scraped out by a small towel, which is not scraped after the corner is trimmed. The lower protective film is completed. When all windows are filmed, apply a small amount of detergent to remove other residues. Wipe with a dry rag to make the window smooth and bright.